Safety Screen Removal - Regency Panorama P121E-NG11 Owners & Installation Manual

installation

Safety Screen Removal

1. Remove upper and lower louvers if installed.
2. Loosen 2 screws in locations shown in Diagram 1.
3. Lift top bracket up and outward to remove as shown in Diagram 2.
4. Remove safety screen by lifting up and out.
|
40
Regency P121E-11/P131E-11 Zero Clearance Direct Vent Gas Fireplace
®
Diagram 1
Diagram 2
Diagram 3
5. Loosen the 2 screws as shown in locations shown in Diagram 4.
6. Pull the bottom bracket down and outward to remove.
7. To install–reverse steps.
Diagram 4
Diagram 5