Wall Thermostat (Optional); Terminal Block Location - Regency Panorama P121E-NG11 Owners & Installation Manual

installation
Wall Thermostat
(Optional)
A wall thermostat may be installed if desired,
connect the wires as per the wiring diagram.
Use the table below to determine the maximum
wire length.
Note: Preferable if the thermostat is
installed on an interior wall.
Regency offers an optional programmable
thermostat but any 250-750 millivolt rated non-
anticipator type thermostat that is CSA, ULC or
UL approved may be used.
CAUTION
Do not connect millivolt
wall thermostat wires
to 120V wire.
|
42
Regency P121E-11/P131E-11 Zero Clearance Direct Vent Gas Fireplace
®
Receptacle Location
For your convenience a receptacle box has been pro-
vided which is located on the same side as the gas
valve on the vent side of the appliance. Also provided
is a white duplex receptacle and cover plate.
Note:120 volt power must be brought to this recep-
tacle by a qualified electrician.
Duplex receptacle
(supplied with
manual package)
Receptacle cover
(supplied with
manual package)
Metal receptacle
attached
to appliance
Completed Installation