Safety Screen/Glass Door Installation/Removal - Regency Grandview G800C Owners & Installation Manual

Safety screen removal
1. Slide screen
up.
2. Slide screen
right.
3. Lower screen
down.
4. Swing screen
outwards
while
keeping the
screen level
and remove.
Safety screen Installation
1. To install the safety screen—Reverse steps above.
Glass door removal
1. To remove the glass door - place both hands on either
side of the latch. Pull forward then up to unlock, repeat
on opposite side.
Important: After releasing the latches, support the weight
of the door.
Latch locations
2. With both latches released, support the door with both
hands and tilt out to approximately a 60 degree angle.
3. Lift the door up and out of lower slots to remove.
Glass door Installation
1. To install the door—Reverse steps above.
owner's information
Grandview® G800C Gas Fireplace
| 13