operating instructions
Battery Backup
To operate the stove during a power outage or when power is
not available see the following steps.
Diagram 1
1. Remove 2 Phillips head screws to remove cover plate. Place
screws to the side. Cover plate not exactly as shown.
See diagram 1.
Battery compartment tabs
Diagram 2
2. Press down on both tabs to remove battery compartment
door. See diagrams 2 and 3.
|
46
Regency
P121E-11/P131E-11 Zero Clearance Direct Vent Gas Fireplace
®
2 Phillips head screws
Battery compartment door
Diagram 4
3. Install 4 AA batteries ensuring they are polarity correct.
See diagram 4.
4. Reverse steps 3-1.
Battery door removed
Diagram 3