Adjusting The White Balance Manually - Sony MICROMV DCR-IP5 Operating Instructions Manual

Adjusting the white balance manually

You can manually adjust and set the white balance. This adjustment makes white
subjects look white and allows more natural color balance. Normally white balance is
automatically adjusted.
(1) In CAMERA or MEMORY (DCR-IP7/IP7BT only) mode, select FN, then press
(2) Select MENU, then press the center z on the control button. The menu
(3) Select WHT BAL through
(4) Select the desired white balance mode, then press the center z on the control
(5) Press DISPLAY to turn off the menu.
To return to the FN screen
Select
PAGE1 screen appears. Next, select EXIT, then press the center z on the control button.
62
the center z on the control button. The PAGE1 screen appears.
appears.
button.
button.
HOLD (HOLD) : Recording a single-colored subject or background
OUTDOOR ( ) :
•Recording a sunset/sunrise, just after sunset, just before sunrise, neon signs, or
fireworks
•Under a color matching fluorescent lamp
INDOOR (n) :
•When lighting condition changes quickly
•In too bright places such as photography studios
•Under sodium lamps or mercury lamps
1
2
MENU
3,4
RETURN, , then press the center z on the control button after step 4. The
, then press the center z or B on the control
FN
MANUAL SET
PROGRAM AE
P EFFECT
WHT BAL AUTO
AUTO SHTR HOLD
RETURN OUTDOOR
INDOOR
5
MANUAL SET
PROGRAM AE
P EFFECT
WHT BAL HOLD
AUTO SHTR
RETURN