Step 1 Preparing The Power Source; Installing The Battery Pack - Sony DCR-HC15 Operation Manual

Step 1 Preparing the power source

Installing the battery pack

(1) Lift up the viewfinder.
(2) Slide the battery pack down until it clicks.
To remove the battery pack
(1) Lift up the viewfinder.
(2) Slide the battery pack out in the direction of the arrow while pressing BATT
If you use the viewfinder when a large capacity battery pack is installed
If you install the NP-QM71/QM71D/QM91/QM91D battery pack on your camcorder,
extend the viewfinder, and lift up the viewfinder to a comfortable angle.
12
down.
BATT release
button