Selecting The Quality And Size Of Image Data - Sony DCR-TRV75 Operating Instructions Manual

Selecting the quality and size of image
data
Selecting still image quality
The default setting is FINE.
The POWER switch should be set to
Operate by touching the panel.
(1) Press FN to display PAGE1.
(2) Press MENU to display the menu.
(3) Select STILL SET in
(4) Select QUALITY, then press EXEC.
(5) Select a desired image quality, then press EXEC.
3
Setting
FINE (FINE)
STANDARD (STD) This is the standard image quality. Standard images
To return to FN
Press EXIT.
, then press EXEC (p. 176).
MEM SET 1 EXIT
STILL SET
OFF
BURST
QUALITY
IMAGESIZE
EXEC RET.
Meaning
Use this mode when you want to record high quality
images. Fine images are compressed to about 1/4.
compressed to about 1/10.
or .
4
MEM SET 1
STILL SET
BURST
QUALITY FINE
IMAGESIZE STANDARD
REMAIN
EXEC
EXIT
12
RET.
103