Chain - BMW S 1000 XR Rider's Manual

Fuse assignment
Retainer 1
15 A (Master relay, diagnosis
plug, instrument cluster, anti-
theft alarm, ignition switch)
Retainer 2
7.5 A (Lap trigger, left multi-
function switch, sensor box)
Retainer 3
30 A (BCO, controller, master
relay)

Chain

Lubricating chain
ATTENTION
Inadequate cleaning and lub-
rication of the drive chain.
Accelerated wear.
Clean and lubricate the drive
chain at regular intervals.
Lubricate the drive chain every
800 km at the latest. Lubricate
the chain more frequently if
the motorcycle is ridden in wet,
dusty or dirty conditions.
Switch the ignition off and se-
lect neutral.
Clean the drive chain with a
suitable cleaning product, dry it
and apply chain lubricant.
To prolong chain life,
BMW Motorrad recommends
the use of BMW Motorrad
chain lubricant, or:
Lubricant
Chain spray
Wipe off excess lubricant.
Checking chain tension
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Turn the rear wheel until it
reaches the position with the
lowest amount of chain sag.
8
163
z