Adjust the chain tension
(
164).
Lighting
Replacing bulbs for low-
beam headlight and high-
beam headlight
NOTICE
The plug arrangement can differ
from the illustration, depending
on the bulb to be replaced.
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Switch off the ignition.
Remove cover panel 1 to re-
place the bulb for the low-
beam headlight.
Remove cover panel 2 to re-
place the bulb for the high-
beam headlight.
Disconnect connector 3.
Disengage spring clip 4 at left
and right and swing it up.
Remove bulb 5 from the
socket.
8
149
z