8
144
Tighten axle clamping screws 1
to the specified tightening
torque.
z
Clamping screws in axle
holder
Tightening sequence: Tighten
screws six times in alternate
sequence
19 Nm
Removing the front-wheel
stand.
Position left and right brake
calipers on the brake discs.
Install securing screws 4 on
left and right and tighten to
specified tightening torque.
Radial brake caliper to
axle mount
38 Nm
Remove the adhesive tape
from the wheel rim.
WARNING
Brake pads not contacting
the brake disc.
Delayed braking effect.
Before riding off, always check
that the brakes bite as soon as