BMW S 1000 XR Rider's Manual page 183

Underneath the rear
carrier
1 Plug for rear additional
power socket
NOTICE
The plug for extra socket 1 is be-
hind rear trim panel 2, tied back
to inner frame 3.
Connecting optional
accessories and racing
accessories
Remove the side panel, rear seat
or tail-hump cover, as applicable,
to gain access to the plugs.
Remove the side panel
( 154).
Removing seat ( 62).
Unlock the protective cap or
terminating resistor, as applic-
able, and disconnect it from the
plug.
Connect the optional accessory
or racing accessory, as applic-
able.
NOTICE
Comply with the installation
instructions supplied with the
optional accessory or racing
accessory.
NOTICE
Tightening the cable ties has to
be the last step in the process;
this is in order to ensure that
the wiring harness can be posi-
tioned correctly and that there is
no strain on the cable legs with
plugs.
ATTENTION
Dirt and damp penetrating
inside open connectors.
Malfunctions
Reinstall the cap or terminating
resistor, as applicable, after re-
moving the plug.
After removing the accessory:
Reinstall the cap or terminating
resistor, as applicable.
Installing side panel (
Installing seat ( 63).
9
181
z
155).