BMW S 1000 XR Rider's Manual page 149

Installing the rear wheel
ATTENTION
Change in tyre size.
Effect on control systems.
Have the new parameters en-
coded by a specialist work-
shop, preferably an authorised
BMW Motorrad dealer.
ATTENTION
Tightening threaded fasten-
ers to incorrect tightening
torque.
Damage, or threaded fasteners
work loose.
Always have the security of
the fasteners checked by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
Roll the rear wheel on the sup-
port into the swinging arm as
far as necessary to permit the
brake-caliper carrier to be in-
serted.
Insert brake-caliper carrier 1
into guide 2.
When rolling the rear wheel
into position, take care not to
damage wheel-speed sensor 1.
Roll the rear wheel further into
the swinging arm, while push-
8
147
z