BMW S 1000 XR Rider's Manual page 86

Display-freeze period for
4
the most recent time
84
z
Setting for HOLD time in
seconds.
After the start of a new lap
the time for the preceding lap
remains visible for this preset
HOLD
time. When this hold time
expires the readout switches
back to the running time for the
current lap.
Range of values
OFF, 5, 10, 15, ... 30
Factory setting: 5
Debounce time for
starting each new lap
You can set the minimum time
that must elapse from when
the first signal is received until
a second signal will be accepted.
Within this debounce time the
headlight flasher can be used
without it triggering the signal
for a new lap.
When an infrared receiver is
being used this prevents the
signals from two or more trans-
mitters in close proximity from
being accepted for processing.
Range of values
OFF, 10, 30, 45, 60
Factory setting: 10
LAPTIMER trigger mode
There are the various options for
starting lap timing.
Range of values
AUTO, EXTERN, MANUAL
Factory setting: AUTO
AUTO: Pressing the headlight
flasher button and a signal from
the lap trigger are both accep-
ted as the trigger source.