BMW S 1000 XR Rider's Manual page 145

ATTENTION
Front wheel installed wrong
way round.
Risk of accident
Note direction-of-rotation ar-
rows on tyre or rim.
Roll the front wheel into posi-
tion between the front forks.
Lift front wheel and fit quick-
release axle 1.
Remove front-wheel stand and
firmly compress front forks sev-
eral times. Do not operate the
brake lever in this process.
Installing auxiliary stand at front
wheel ( 129).
Install screw 1 and tighten to
specified torque. Counter-hold
quick-release axle on the right-
hand side.
Screw in front-wheel
quick-release axle
50 Nm
Tighten axle clamping screws 2
to the specified tightening
torque.
Clamping screws in axle
holder
Tightening sequence: Tighten
screws six times in alternate
sequence
19 Nm
8
143
z