BMW S 1000 XR Rider's Manual page 46

change in ambient brightness
4
is delayed).
Automatic for daytime riding
44
light is switched off.
The low-beam headlight
and the front side lights are
switched on.
Press button 1 again.
Automatic for daytime riding
light is re-activated.
The daytime riding light is
switched on again as soon as
z
ambient light is bright enough.
The indicator light for the
daytime riding light shows if
the daytime riding light is active.
Manual daytime riding
light
Automatic for daytime riding light
must be switched off.
WARNING
Activation of daytime riding
light in the dark.
Poorer vision and oncoming
traffic dazzled.
Do not use the daytime run-
ning light when it is dark.
NOTICE
By comparison with the low-
beam headlight, the daytime
running light makes the vehicle
more visible to oncoming traffic.
This improves daytime visibility.
Start engine ( 99).
Repeatedly short-press INFO 3
SETUP MENU ENTER
until
appears on the display.
Long-press INFO 3.
SETUP MENU
The
Repeatedly short-press TRIP 2
SETUP
or INFO 3 until
EQUIPMENT ENTER
appears on the display.
Long-press INFO 3.
SETUP EQUIPMENT
The
menu opens.
Repeatedly short-press TRIP 2
SETUP
or INFO 3 until
EQIP:DRL AUTO
on the display.
Long-press INFO 3 to switch
automatic daytime riding light
OFF
.
Press button 1 to switch on
the daytime riding light.
The low-beam headlight
and the front side lights are
switched off.
The indicator light for the
daytime riding light shows if
the daytime riding light is active.
In the dark or in tunnels: Press
button 1 again to switch off the
opens.
appears