Rear-Wheel Stand - BMW S 1000 XR Rider's Manual

Adjust adapters 3 to the width
8
of the service adapters inserted
in the front suspension.
130
Set the height of the auxiliary
stand to raise the front wheel
slightly clear of the ground.
z
Engage the auxiliary stand in
the front suspension and apply
even pressure to push it down
to the ground.

Rear-wheel stand

Install the rear-wheel
stand
Use basic stand with tool num-
ber (83 30 0 402 241) and ad-
apters (83 30 2 152 839).
Install service adapters (83 30
2 152 841) 1 in the rear wheel
swinging arm on left and right
and tighten to the specified
torque.
Swinging-arm adapter to
rear wheel swinging arm
20 Nm