Chain - BMW F 900 R 2019 Rider's Manual

Disengage diagnostic socket 2
9
from holder 3.
The interface to the diagnosis
184
and information system can be
connected to the diagnostic
connector 2.
Securing diagnostic
socket
Disconnect the interface for
the diagnosis and information
system.
z
Insert diagnostic socket 2 into
holder 3.
The locks 1 engage.
Install the seat (

Chain

Lubricating chain
ATTENTION
Inadequate cleaning and lub-
rication of the drive chain
Accelerated wear
Clean and lubricate the drive
chain at regular intervals.
Lubricate the drive chain every
800 km at the latest. Lubricate
the chain more frequently if
the motorcycle is ridden in wet,
dusty or dirty conditions.
Switch the ignition off and se-
lect neutral.
Clean the drive chain with a
suitable cleaning product, dry it
and apply chain lubricant.
NOTICE
BMW Motorrad recommends
that you use the chain cleaning
92).
products and chain lubricants
obtainable from your authorised
BMW Motorrad dealer.
Wipe off excess lubricant.
Checking chain sag
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Turn the rear wheel until it
reaches the position with the
lowest amount of chain sag.
Use a screwdriver to push the
chain up and down and meas-
ure difference A.