Dynamic Traction Control - BMW S 1000 XR Rider's Manual

Press and hold down button 1
until ASC telltale and warning
light 2 changes status.
The ABS setting remains un-
changed.
ASC telltale and warning
light starts to show.
Release button 1 within two
seconds.
ASC telltale and warning
light remains on.
ASC is switched off.
ASC Switching on
Press and hold down button 1
until ASC telltale and warning
light 2 changes status.
ASC telltale and warn-
ing light goes out; if self-
diagnosis has not completed it
starts flashing.
Release button 1 within two
seconds.
ASC telltale and warning
light remains off or contin-
ues to flash.
ASC is switched on.
You also have the option of
switching the ignition off and
then on again.
An ASC fault has oc-
curred if the ASC telltale
and warning light shows when
the motorcycle accelerates to
a speed in excess of the min-
imum stated below after the
ignition was switched off and
then on again.
min 10 km/h
Dynamic Traction
Control
with Dynamic Traction Control
(DTC) OE
DTC Switching off
Switch on the ignition.
4
53
z