BMW S 1000 XR Rider's Manual page 144

8
142
Withdraw quick-release axle 1,
support the front wheel when
doing this.
Set down front wheel and
z
roll forwards out of the front
suspension.
Remove spacer bush 1 from
the wheel hub.
Installing front wheel
WARNING
Use of a non-standard wheel.
Malfunctions in operation of ABS
and DTC.
See the information on the ef-
fect of wheel size on the ABS
and DTC systems at the start
of this chapter.
ATTENTION
Tightening threaded fasten-
ers to incorrect tightening
torque.
Damage, or threaded fasteners
work loose.
Always have the security of
the fasteners checked by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
Slip spacing bushing 1 into
the wheel hub on the left-hand
side.