Rear-Wheel Stand - BMW R 1250 R 2019 Rider's Manual

9
160
ATTENTION
Center stand retracts if mo-
torcycle is lifted too high.
z
Component damage cause by
tipping over
When raising the motorcy-
cle, make sure that the center
stand remains on the ground.
Apply uniform pressure to push
front wheel stand down and
raise motorcycle.

Rear-wheel stand

Mounting rear-wheel
stands
Park motorcycle, ensuring that
support surface is firm and
level.
Use basic stand with rear
wheel adapter. The basic
stand and its accessories
are available through your
authorized BMW Motorrad
retailer.
Set desired height of rear-
wheel stand using bolts 1.
Remove the lock washer 2; to
do so, press the unlock but-
ton 3.
Push the rear-wheel stand from
the right onto the rear axle.
Apply the retaining disk from
the left; to do so, press the un-
lock button.