When The Machine Does Not Operate As Wanted; Indicators - Ricoh Pro 907 Operating Instructions And Troubleshooting

1. When the Machine Does Not Operate
As Wanted
This chapter describes basic troubleshooting procedures.

Indicators

This section describes indicators that appear on the display panel.
Display Panel Indicator
Indicator
: Misfeed indicator
: Load Paper indicator
: Add Toner indicator
: Add Staple indicator
: Waste Toner Full indicator
: Empty Hole Punch Receptacle
indicator
: Empty Waste Staple Receptacle
indicator
: Service Call indicator
: Open Cover indicator
• p.47 "Removing Jammed Paper"
• p.68 "Removing Jammed Staples"
Appears when a misfeed occurs.
See p.47 "Removing Jammed Paper".
Appears when paper runs out.
See "Loading Paper", About This Machine
Appears when toner runs out.
See "Adding Toner", About This Machine
Appears when staples run out.
See "Adding Staples", About This Machine
Appears when the waste toner bottle is full.
Contact your service representative.
Appears when the hole punch receptacle is full.
See p.72 "Removing Punch Waste".
Appears when the waste staple receptacle is full.
See p.73 "Removing Staple Waste".
Appears when the machine is malfunctioning or requires
maintenance.
Appears when one or more covers of the machine is open.
Status
.
.
.
1
11