Ricoh Pro 907 Operating Instructions And Troubleshooting page 39

Problem
Images appear only partially. The paper is damp.
When paper is not fed properly
Problem
Paper is not fed from the
selected tray.
Images are printed at a slant. The paper tray's side fences
Images are printed at a slant. The paper is feeding in at a
Original images are printed
on the reverse side of the
paper.
Misfeeds occur frequently.
Cause
Cause
When you are using a
Windows operating system,
printer driver settings override
those settings using the
display panel.
might not be locked.
slant.
You may have loaded the
paper incorrectly.
Paper of undetectable size
has been loaded.
Other Printing Problems
Solution
Use paper that has been stored in the
recommended temperature and
humidity condition. See "Paper
Storage", About This Machine
Solution
In the [Setup] menu in the printing
preferences properties dialog box,
change the [Paper source tray:] setting.
Check the side fences are locked. See
"Changing the Paper Size", About This
Machine .
Load paper correctly. See "Loading
Paper", About This Machine
Load paper correctly. Place paper in the
paper tray with the print side down. Load
paper into the Wide LCT or bypass tray
with the print side up.
• Remove the misfed paper. For
details, see p.47 "Removing
Jammed Paper".
• If you load a paper size that is not
selected automatically, you need
to specify the paper size with the
control panel. For details, see
"Changing the Paper Size", About
This Machine .
.
2
.
37