Pausing Printing When Using The Finisher Or The Booklet Finisher - Ricoh Pro 907 Operating Instructions And Troubleshooting

Pausing Printing When Using the Finisher or the
Booklet Finisher
Use the following procedure to temporarily interrupt a long print run when using the Finisher or the Booklet
Finisher.
1. Press the [Suspend/Resume] key.
The key lights and printing stops.
2. Remove the stack of paper from the Finisher Shift Tray.
3. Press the [Suspend/Resume] key.
The key's light turns off. To restart printing, press [Online] on the machine's control panel.
• You can suspend printing only if the output tray is specified as the Finisher Shift Tray.
• Depending on the print image, the prints might not be stacked properly. In such a case, pause printing,
remove the prints, and then resume printing.

Pausing Printing When Using the Finisher or the Booklet Finisher

4
BQL050S
BQL051S
77