Ricoh Pro 907 Operating Instructions And Troubleshooting page 32

2. Troubleshooting When Using the Printer Function
Message
"Specified paper size /
paper type / paper color /
paper thickness / do not
match any tray paper
2 settings. Change the tray
paper settings to the
following paper size / paper
type / paper color / paper
thickness."
"Specified paper tray is not
available. Press [Job Reset] to
cancel printing."
"[Speed Priority] is set for
[Method for Switching
between 1 & 2 Sided Feed]."
"Stacker Cover(s) are open
or the handcart is not set.
Check the Stacker."
"The same IPv4 Address
exists on more than one
interfaces."
30
Cause
The machine was unable to
automatically select a tray
containing the required
paper.
The selected paper tray is
unavailable.
[Meth. for Switching between
1&2 Sided Feed] is set to
[Speed Priority].
One of the stacker's front
covers is open or the
handcart is not attached.
The same IPv4 address is in
use by another device on the
same subnet.
Solution
Configure the settings of the displayed
paper to match the specified paper size,
type, color, and thickness. Alternatively,
press [Job Reset] to cancel the print job.
For details, see "If Paper Size and Type
Errors Occur", Printer Reference
details about the supported paper sizes,
types, and thicknesses, see
"Recommended Paper Sizes and
Types", About This Machine
details about the paper colors, see
"Normal Screen", Printer Reference
Press [Job Reset] to cancel the print job,
and then select the correct paper tray.
Under [General Settings], [Basic
Configuration], [Printer Features], set
[Meth. for Switching between 1&2
Sided Feed] to [Job Settings Priority]. For
details about this function, see "Basic
Configuration", Printer Reference
Check that the stacker's front covers are
closed and the handcart is attached
correctly. For details about attaching the
handcart, see "Removing Paper from the
Stacker", About This Machine
Check that the system's IPv4 address
specified for the machine is correct and
unique within the subnet, and change it
if necessary. For details about the
system's IP address, see "System
Settings", Network and System Settings
Guide .
. For
. For
.
.
.