Removing Staple Waste; Finisher; Booklet Finisher - Ricoh Pro 907 Operating Instructions And Troubleshooting

Removing Staple Waste

This section describes how to remove staple waste.
• While "Waste Staple Receptacle is full." is displayed, you cannot use the staple function.
• "Waste Staple Receptacle is full." is displayed until the waste staple box is reinstalled.
• If the message is still displayed, reinstall the waste staple box.

Finisher

Use the following procedure to remove staple waste from the Finisher.

Booklet Finisher

Use the following procedure to remove staple waste from the Booklet Finisher.
Removing Staple Waste
BQL032S
BQL034S
73
3