Checking Machine Status And Settings - Ricoh Pro 907 Operating Instructions And Troubleshooting

1. When the Machine Does Not Operate As Wanted

Checking Machine Status and Settings

This section describes how to check the machine's system status.
1
Maintenance Info
You can check the following items under [Maintenance Info]:
• [Remaining Toner]
Displays the amount of remaining toner.
• [No Staples]
Displays whether there are staples remaining.
• [Punch Receptacle Full]
Displays whether the hole punch receptacle is full.
• [Waste Staple Receptacle Full]
Displays whether the waste staple receptacle is full.
• [Waste Paper Receptcl Full]
Displays whether the waste paper receptacle is full.
• [Paper Tray]
Displays the paper type and size loaded in the paper trays.
• [Output Tray Full]
Displays whether the output tray is overloaded.
• [Paper Misfeed]
Displays state of and solutions for paper jams.
• [Cover Open]
Indicates the cover that is open.
Machine Address Info
You can check the following items under [Machine Address Info]:
• [Machine IPv4 Address]
Displays the system's IPv4 address.
• [Machine IPv6 Address]
Displays the system's IPv6 address.
[Manual Configuration Address] displays the system's IPv6 address configured manually.
Inquiry
You can check the following items under [Inquiry]:
• [Machine Repairs]
12