Ricoh Pro 907 Operating Instructions And Troubleshooting page 81

If the paper fed to the output tray is still not aligned even with the large Z-fold support tray for Folding Unit
attached, attach the small Z-fold support tray for Folding Unit as well.
1. Open the front cover of the Folding Unit and remove the large Z-fold support tray (located
at the bottom of the Folding Unit).
2. Position the large Z-fold support tray flush against the end fence in the slope of the Folding
Unit Tray.
• When you have finished with the large Z-fold support tray, open the front cover of the Folding Unit
and hang it back up on the stowage hook.
If the Paper Fed to the Output Tray Is Still Not Aligned
If Z-folded sheets are not output in proper alignment even when the Z-fold support tray for the Folding Unit
(Large) is attached, attach the Z-fold support tray for the Folding Unit (Small) as well.
When Z-folded Paper Is Not Properly Aligned
BQL071S
BQL072S
4
79