Ricoh Pro 907 Operating Instructions And Troubleshooting page 40

2. Troubleshooting When Using the Printer Function
Problem
Misfeeds occur frequently.
2
Misfeeds occur frequently.
Misfeeds occur frequently.
Misfeeds occur frequently.
Misfeeds occur frequently.
Misfeeds occur frequently.
Misfeeds occur frequently.
38
Cause
There is a foreign object on
the finisher tray.
The staple cartridge is not set
correctly.
The side or end fences of the
paper trays may not be set
properly.
The paper tray's side fences
are set too tightly.
The number of sheets loaded
exceeds the capacity of the
machine.
The paper is damp.
The paper is too thick or too
thin.
Solution
• Remove the misfed paper. For
details, see p.47 "Removing
Jammed Paper".
• Do not place anything on the
finisher tray. It may cause a paper
jam.
Set the staple cartridge properly. The
Booklet Finisher requires the saddle
stitch staple cartridge. For details about
how to add staples, see "Adding
Staples", About This Machine
• Remove the misfed paper. For
details, see p.47 "Removing
Jammed Paper".
• Check the side or end fences are
set properly. Also, check the side
fences are locked. For details, see
"Changing the Paper Size", About
This Machine .
Push the side fences lightly, and then
reset it.
Load paper only as high as the upper
limit markings on the side fences of the
paper tray.
Use paper that has been stored in the
recommended temperature and
humidity condition. See "Paper
Storage", About This Machine
Use recommended paper. See
"Recommended Paper Sizes and
Types", About This Machine
.
.
.