Removing Punch Waste; Finisher; Booklet Finisher - Ricoh Pro 907 Operating Instructions And Troubleshooting

3. Clearing Misfeeds

Removing Punch Waste

This section describes how to remove punch waste.
• While "Hole Punch Receptacle is full." is displayed, you cannot use the punch function.
• "Hole Punch Receptacle is full." is displayed until the punch waste box is reinstalled.
• If the message is still displayed, reinstall the punch waste box.
3
• If the message is still displayed, reinstall the receptacle.

Finisher

Use the following procedure to remove punch waste from the Finisher.

Booklet Finisher

Use the following procedure to remove punch waste from the Booklet Finisher.
72
BQL031S
BQL035S