Indicator
Status Indicator
Flashing red
Toner has nearly run out.
See "Adding Toner",
About This Machine
To resolve problems, refer to the following:
Problem
Documents and reports do
not print out.
Documents and reports do
not print out.
An error has occurred.
The machine is unable to
connect to the network.
• p.21 "Messages Displayed When Using the Printer Function"
• p.47 "Removing Jammed Paper"
• p.68 "Removing Jammed Staples"
Function status indicators
-
.
Cause
The paper output tray is full.
There is no paper left.
The function is not working
properly.
A network error has
occurred.
If the Indicators are Lit Red
[Start] indicator
-
Solution
Remove prints from the tray.
Load paper. See "Loading Paper",
About This Machine
See p.21 "Messages Displayed
When Using the Printer Function".
• Check the displayed message and
take the appropriate action. See
p.21 "Messages Displayed
When Using the Printer Function".
• Check the machine is correctly
connected to the network and that
its network settings are correctly
configured. For details about how
to connect the machine to the
network, see "Connecting the
Machine", Network and System
Settings Guide
.
• Contact your network
administrator.
• If the indicator continues to flash,
contact your service
representative.
1
.
17