Table of Contents
Advertisement
Removing the processor-cooling assembly
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
Remove the
right-side
cover.
Procedure
1
Lay the computer on the left side and disconnect the fan cable from the system board.
2
Disconnect the processor-cooling assembly cable from the system board.
3
In the reverse sequential order (as indicated on the processor-cooling assembly), loosen the four captive screws that secure the
processor-cooling assembly to the system board.
4
Remove the screw (6-32UNCx3.6) that secures the fan to the chassis.
5
Lift and release the fan from the chassis.
6
Lift the processor-cooling assembly along with the fan off the system board.
computer. After working inside your computer, follow the instructions in
After working inside
www.dell.com/
Removing the processor-cooling assembly
37
63
Hide quick links:
Advertisement
Table of Contents
