Table of Contents
Advertisement
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1
Remove the
right-side
cover.
2
Remove the
wireless
card.
Procedure
NOTE:
Note the routing of white antenna cable and black antenna cable on the chassis while removing them so that you can
replace them correctly.
1
Lay the computer on the left side and remove the screw (M3x5) that secures the antenna cables to the chassis.
2
Peel the tape that secures the antenna cables to the chassis.
3
Remove the screw (M3x5) and the tape that secures the antenna cables to the chassis.
4
Remove the antenna cables from the routing guide on the chassis.
computer. After working inside your computer, follow the instructions in
Removing the antennas
www.dell.com/
45
After working inside
Removing the antennas
77
Hide quick links:
Advertisement
Table of Contents
