WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1
Align the logo board with the slot on the chassis.
2
Replace the two screws (M3x5) that secures the logo board to the chassis.
3
Connect the logo-board cable to the logo board.
Post-requisites
1
Replace the
front
cover.
2
Replace the
right-side
cover.
88
Replacing the logo board
Replacing the logo board
computer. After working inside your computer, follow the instructions in
52
After working inside
www.dell.com/