Table of Contents
Advertisement
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
CAUTION:
Solid-state drives are fragile. Exercise care when handling the solid-state drive.
CAUTION:
To avoid data loss, do not remove the solid-state drive while the computer is in sleep or on state.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
Remove the
right-side
cover.
Procedure
1
Lay the computer on the left side and locate the solid-state drive slot on the system board.
2
Remove the screw (M2x3.5) that secures the solid-state drive to the system board.
3
Slide and lift the solid-state drive off the system board.
Removing the solid-state drive
computer. After working inside your computer, follow the instructions in
After working inside
www.dell.com/
Removing the solid-state drive
15
25
Hide quick links:
Advertisement
Table of Contents
