Dell Inspiron 5676 Service Manual page 111

Main
Cache L3
First HDD
SATA ODD
Second HDD
Third HDD
Fourth HDD
System Memory
Memory Speed
Table 3. System setup options—Advanced menu
Advanced
Advanced BIOS Features
PowerNow! Enable
Virtualization
Integrated NIC
SATA Option
BIOS Recovery from Hard Drive
BIOS Auto-Recovery
Integrity Check
USB Configuration
Front USB Ports
Rear USB Ports
USB Debug
Power Options
Wake Up by Integrated LAN/WLAN
AC Recovery
Deep Sleep Control
USB Powershare in S4/S5 state
USB Powershare in Sleep state
Displays the processor L3 cache size.
Displays the primary hard disk.
Displays the optical-drive disk.
Displays the secondary hard disk.
Displays the third hard disk.
Displays the fourth hard disk.
Displays the total computer memory installed.
Displays the memory speed.
Allows you to enable or disable the Power now Technology feature
for the processor.
Default: Enabled
Allows you to enable or disable Intel Virtualization Technology
feature for the processor.
Allows you to enable or disable the on-board LAN controller.
Default: Enabled
This option configures the operating mode of the integrated SATA
hard drive controller.
Default: AHCI
Allows you to enable or disable BIOS Recovery from hard drive.
Allows you to enable or disable BIOS Auto-Recovery
When enabled, BIOS checks the BIOS image integrity on every boot.
When Disabled, BIOS checks the image integrity only if the previous
boot did not complete.
Default :Disabled
Allows you to enable or disable the front USB ports.
Allows you to enable or disable the rear USB ports.
Allows you to enable or disable USB debug port.
Default: Disabled
Allow the computer to be powered on by special LAN signals.
Sets what action the computer takes when power is restored.
Allows you to control the Deep Sleep mode support.
Allows you to charge USB devices in S4/S5 state.
Allows you to charge USB devices in sleep state
System setup 111