Removing The Processor Liquid-Cooling Assembly - Dell ALIENWARE AURORA - GAMING MACHINE - ALIENWARE AURORA Service Manual

Removing the Processor Liquid-Cooling Assembly

1. Follow the instructions in "Before You Begin" on page
2. Remove the left side-panel (see "Removing the Left Side-Panel" on page
WARNING: Despite having a plastic shield, the processor liquid-cooling
assembly may be very hot during normal operation. Ensure that it has
had sufficient time to cool before you touch it.
3. Disconnect the processor liquid-cooling assembly cable from the connectors
(SYS FAN and CPU PUMP) on the top-lighting board.
4. Loosen the four captive screws that secure the processor liquid-cooling
assembly to the system board.
5. Remove the four screws that secure the processor liquid-cooling assembly
to the chassis rear wall.
6. Slide and lift the processor liquid-cooling assembly away from the chassis.
6.
5
11).
1 processor liquid-cooling assembly
3 cables (2)
5 screws (4)
CHAPTER 9: PROCESSOR LIQUID-COOLING ASSEMBLY
2 top lighting-board
4 captive screws (4)
1
2
3
4
048
/
048