WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1
Remove the
right-side
cover.
2
Remove the
front
cover.
3
Remove the
slim optical drive
4
Remove the
top
cover.
Procedure
1
Lay the computer on the left side and disconnect the power-button cable from the system board.
2
Remove the power-button cable from the routing guides on the chassis.
3
Press the tab on the power-button board to release the module from the top panel.
4
Remove the power-button board along with its cable through the slot on the top panel.
Removing the power-button board
computer. After working inside your computer, follow the instructions in
After working inside
www.dell.com/
Removing the power-button board
55
93