WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1
Remove the
right-side
cover.
2
Remove the
front
cover.
Procedure
1
Disconnect the logo-board cable from the logo board.
2
Disconnect the two screws (M3x5) that secures the logo board to the chassis.
3
Remove the logo board from the chassis.
Removing the logo board
computer. After working inside your computer, follow the instructions in
51
After working inside
www.dell.com/
Removing the logo board
87