WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1
Align and slide the light bar into the slot on the chassis.
2
Replace the screw (M3x5) that secures the light bar to the chassis.
3
Connect the light bar cable to its connector on the chassis.
Post-requisites
Replace the
right-side
cover.
computer. After working inside your computer, follow the instructions in
Replacing the light bar
www.dell.com/
10
After working inside
Replacing the light bar
19