WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
CAUTION:
Incorrect alignment of the heat sink can damage the system board and processor.
NOTE:
If either the system board or the heat sink is replaced, use the thermal pad provided in the kit to ensure that thermal
conductivity is achieved.
Topics:
•
Procedure
•
Post-requisites
Procedure
Place the heat sink on a clean and flat surface.
Post-requisites
1
Replace the
processor
fan.
2
Replace the
right-side
cover.
76
Replacing the heat sink
computer. After working inside your computer, follow the instructions in
Replacing the heat sink
www.dell.com/
44
After working inside