Removing the processor-cooling
assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
Remove the
right-side
Procedure
NOTE: Applicable only for computers with liquid cooling assembly
configuration.
1
Lay the computer on the left side and disconnect the fan cable from the system
board.
2
Disconnect the processor-cooling assembly cable from the system board.
3
In the reverse sequential order (as indicated on the processor-cooling assembly),
loosen the four captive screws that secure the processor-cooling assembly to
the system board.
82
computer. After working inside your computer, follow
After working inside your
cover.
computer. For more safety best
www.dell.com/
Before