Table of Contents
Advertisement
Steps
1. Place the processor fan and heat-sink assembly on the processor.
2. Align the captive screws on the processor fan heat-sink assembly with the screw holes on the system board.
3. In sequential order, tighten the four captive screws that secure the processor fan and heat-sink assembly to the system
board.
4. Connect the processor-fan cable to the system board.
Next steps
1. Install the
left-side
cover.
2. Follow the procedure in
Processor liquid-cooling assembly
Removing the processor liquid-cooling assembly
Prerequisites
1. Follow the procedure in
WARNING:
Despite having a plastic shield, the processor liquid-cooling assembly may be very hot during
normal operation. Ensure that it had sufficient time to cool before you touch it.
CAUTION:
For maximum cooling of the processor, do not touch the heat transfer areas on the heat sink. The
oils in your skin can reduce the heat transfer capability of the thermal grease.
2. Remove the
left-side
62
Removing and installing components
After working inside your
Before working inside your
cover.
computer.
computer.
Advertisement
Table of Contents
