WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1
Remove the
right-side
cover.
2
Remove the
front
cover.
3
Remove the
slim optical
drive.
4
Remove the
front I/O
panel.
5
Remove the
logo
board.
6
Remove the
front-panel light
7
Remove the
light
bar.
8
Remove the
top
cover.
Procedure
1
Place the computer in the standing position and remove the 11 screws (M3x5) that secure the front bezel to the chassis.
2
Remove the front bezel from the chassis.
computer. After working inside your computer, follow the instructions in
board.
Removing the front bezel
57
After working inside
www.dell.com/
Removing the front bezel
97