Table of Contents
Advertisement
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1
Connect the antenna cables to the wireless card.
2
Place the wireless-card bracket over the wireless card.
3
Align the notch on the wireless card with the tab on the wireless-card slot and slide the wireless card at an angle into the wireless-card
slot.
4
Replace the screw (M2x3.5) that secures the wireless card to the system board.
5
Place the computer in an upright position.
Post-requisites
Replace the
right-side
cover.
Replacing the wireless card
computer. After working inside your computer, follow the instructions in
26
After working inside
www.dell.com/
Replacing the wireless card
47
Hide quick links:
Advertisement
Table of Contents
