WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1
Align the antenna cables to the slots on chassis and adhere the antenna cables to the chassis.
2
Replace the two screws (M3x5) that secures the antenna cables to the chassis.
3
Route the antenna cables through the routing guides on the chassis.
4
Place the computer in an upright position.
Post-requisites
1
Replace the
wireless
card.
2
Replace the
right-side
cover.
78
Replacing the antennas
computer. After working inside your computer, follow the instructions in
Replacing the antennas
www.dell.com/
46
After working inside