WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1
Align the slots on the rear cover with the tabs on the chassis and snap the cover in place.
2
Align the screw holes on the top bracket with the screw holes on the chassis.
3
Replace the two screw (M3x5) that secures the top bracket to the chassis.
4
Place the computer in an upright position.
Post-requisites
1
Replace the
bottom
cover.
2
Replace the
left-side
cover.
3
Replace the
top
cover.
Replacing the rear cover
computer. After working inside your computer, follow the instructions in
60
After working inside
www.dell.com/
Replacing the rear cover
103