Enabling A Partial Configuration; Displaying Cns Configuration - Cisco Catalyst 2950 Software Configuration Manual

Displaying CNS Configuration

Enabling a Partial Configuration

Beginning in privileged EXEC mode, follow these steps to enable the CNS configuration agent and to
initiate a partial configuration on the switch:
Command
Step 1 configure terminal
Step 2 cns config partial {ip-address | hostname} [port-number]
[source ip-address]
Step 3
end
Step 4
show cns config stats
or
show cns config outstanding
Step 5
show running-config
Step 6
copy running-config startup-config
To disable the CNS configuration agent, use the no cns config partial {ip-address | hostname} global
configuration command. To cancel a partial configuration, use the cns config cancel privileged EXEC
command.
Displaying CNS Configuration
You can use the privileged EXEC commands in
Table 5-2
Command
show cns config connections
show cns config outstanding
show cns config stats
show cns event connections
Catalyst 2950 Desktop Switch Software Configuration Guide
5-12
Displaying CNS Configuration
Purpose
Displays the status of the CNS configuration agent connections.
Displays information about incremental (partial) CNS
configurations that have started but are not yet completed.
Displays statistics about the CNS configuration agent.
Displays the status of the CNS event agent connections.
Chapter 5
Purpose
Enter global configuration mode.
Enable the configuration agent, and initiate a partial
configuration.
For {ip-address | hostname}, enter the
•
IP address or the host name of the configuration
server.
• (Optional) For port-number, enter the port
number of the configuration server. The default
port number is 80.
• (Optional) Enter source ip-address to use for the
source IP address.
Though visible in the command-line help
Note
string, the encrypt keyword is not supported.
Return to privileged EXEC mode.
Verify information about the configuration agent.
Verify your entries.
(Optional) Save your entries in the configuration file.
Table 5-2 to display CNS Configuration information.
Configuring IE2100 CNS Agents
78-11380-04