Configuring A New Device - Siemens SITRANS LR560 Operating Instructions Manual

Operating
7.1 Remote operation
To install a new EDD:
1. Go to LR560 (www.siemens.com/LR560) > Support > Software downloads to download
the most up-to-date EDD.
2. Save files to your computer, and extract the zipped file to an easily accessed location.
3. Launch SIMATIC PDM – Manage Device Catalog, browse to the unzipped EDD file and
select it.
①
Firmware and Electronic device description (EDD) revisions
7.1.1.4

Configuring a new device

Note
• Clicking on Cancel during an upload from device to SIMATIC PDM will result in some
parameters being updated.
• Application Guides for setting up HART and Profibus PA devices with SIMATIC PDM can
be downloaded from our website:
LR560 (www.siemens.com/LR560).
1. Check that you have the most recent EDD, and if necessary update it. See Updating the
Electronic Device Description (EDD) (Page 61).
2. Launch SIMATIC Manager and create a new project for the device.
3. Open the menu Device – Master Reset and click on OK to perform a reset to Factory
Defaults.
4. After the reset is complete upload parameters to the PC/PG.
5. Configure the device via the Quick Start wizard.
62
LR560 (PROFIBUS PA)
Operating Instructions, 06/2018, A5E34648471-AE