VALUE (2.5.9.2.)
Note
FAIL-SAFE (2.5.9.) (Page 110) must be set to SUB VALUE before this parameter can be
defined.
Factory setting:
Setting range:
Purpose:
8.2.6
AIFB2
See AIFB1 (Page 106): the parameters for AIFB2 are identical.
8.2.7
MEASURED VALUES (2.7.)
8.2.7.1
MEASURED VALUES (2.7.)
Purpose:
Description:
Process variables:
8.2.7.2
MAIN OUTPUT (2.7.1.)
The value for level/volume, always displayed here in percent.
8.2.7.3
OUTPUT NO LINEARIZATION (2.7.2.)
The value for level, always displayed here in percent.
8.2.7.4
OUTPUT NO OFFSETS (2.7.3.)
The value for distance, displayed in sensor units.
LR560 (PROFIBUS PA)
Operating Instructions, 06/2018, A5E34648471-AE
0
Range: -999999 to 999999
User-defined default for the Output Value, if sensor or sensor electronic
fault is detected. Units are defined in UNIT (2.5.8.2.) (Page 110).
Read only. Allows you to view measured values for diagnostic purposes.
To access measured values via SIMATIC PDM:
Open the menu View – Process Variables.
•
MAIN OUTPUT (2.7.1.) (Page 111)
OUTPUT NO LINEARIZATION (2.7.2.)
(Page 111)
OUTPUT NO OFFSETS (2.7.3.)
(Page 111)
Parameter Reference
8.2 SETUP (2.)
The value for Level/Volume, al-
ways displayed here in percent.
The value for Level, always dis-
played here in percent.
The value for distance, displayed
in sensor units.
111