Event Status (3.6.2.) - Siemens SITRANS LR560 Operating Instructions Manual

To select a particular event via the handheld programmer:
1. Go to ENABLE (3.5.1.) (Page 115) and select Yes to enable Condensed Mode.
2. Go to Event Index (3.6.1.) and enter the event index number corresponding to the event.
To select a particular event via SIMATIC PDM:
1. Go to Maintenance & Diagnostics > Condensed Status > Enable and select Yes to
enable Condensed Mode.
2. Go to Maintenance & Diagnostics > Allocation Level.
3. For each event, you can select either the Status or the Diagnosis line, then choose a
Status or Diagnosis option from the associated pull-down menu.
8.3.9

EVENT STATUS (3.6.2.)

Factory setting:
Setting range:
Purpose:
To assign a status to a particular event via the handheld programmer:
1. Go to ENABLE (3.5.1.) (Page 115) and select Yes to enable Condensed Mode.
2. Go to EVENT INDEX (3.6.1.) (Page 116) and enter the event index number
corresponding to the event.
3. Go to Event Status (3.6.2) and choose a Status option from the table above.
To assign a status to a particular event via SIMATIC PDM:
1. Go to Level Meter > Maintenance & Diagnostics > Condensed Status > Enable and select
Yes to enable Condensed Status Mode.
2. Go to Level Meter > Maintenance & Diagnostics > Allocation Level.
3. Select the Status line for the selected Event, then choose a Status option from the
associated pull-down menu.
See Condensed status (Page 187) for more detail.
1)
LR560 (PROFIBUS PA)
Operating Instructions, 06/2018, A5E34648471-AE
Bad: maintenance alarm
Good
Good: maintenance required
Good: maintenance demanded
Uncertain: maintenance demanded
Bad: maintenance alarm
Uncertain: process related, no maintenance
Bad: process related, no maintenance
Bad: function check/local override
Good: function check
Event Status allows you to assign one of the status options listed
above, to anyof the events listed in EVENT INDEX (3.6.1.) (Page 116).
This allows you to tailor a device response appropriate for your particu-
lar process. (Event Status affectsCondensed Status
Parameter Reference
8.3 DIAGNOSTICS (3.)
).
1)
117